Professional material cleaning procedures in industrial cleaning in Ha Noi

This article provides a detailed guide to common material cleaning procedures in industrial cleaning in Ha Noi, based on practical experience from professional companies. Before commencing any task, the site supervisor must survey the entire area: assessing soil levels, difficulty, water sources, and drainage to select appropriate equipment and chemicals. Always adhere to the principle of working from top to bottom, inside to out, and handling water sources last.

1. Cleaning procedures for cement and ceramic tile floors

Cement and ceramic tiles are common in factories, garages, or public areas in Ha Noi, where construction debris easily accumulates.

The basic process:

– Sweep and vacuum the entire floor to remove loose dust.

– Remove paint splatters using specialized chemicals and scraping tools.

– Dilute chemicals according to instructions (usually neutral detergents).

– Release chemicals from the floor scrubber onto the surface.

– Scrub the floor using a specialized scrubbing machine.

– Vacuum up dirty water using a wet/dry vacuum or a squeegee.

– For ceramic tiles, add a step to remove any remaining stubborn stains.

– Inspect and finalize. Using a walk-behind or ride-on floor scrubber speeds up the process, especially for large areas in industrial cleaning in Ha Noi projects.

2. Cleaning and coating ceramic tiles and granite

Ceramic tiles and granite are popular in hotel lobbies and high-end offices.

a. Cleaning

– Vacuum the entire area.

– Scrape off paint using chemicals and scrapers.

– Dilute and apply chemicals.

– Scrub by machine or by hand.

– Vacuum dirty water and spot-clean remaining stains.

b. Protection/Polishing (for ceramic tiles)

– Ensure the surface is completely dry.

– Apply 2-3 layers of water-based or oil-based coating, allowing each layer to dry in between.

c. Granite polishing

– After cleaning, apply polishing chemicals.

– Wait for the surface to become tacky.

– Use a high-speed polisher with a white or red pad.

– Vacuum up excess dust. In industrial cleaning in Ha Noi, this procedure keeps granite looking beautiful and effectively resists scratches at iconic buildings like Keangnam or Lotte Center.

3. Cleaning procedures for marble and granito

Marble and granito are high-end materials with soft, porous surfaces. Acidic chemicals must be strictly avoided to prevent damage or mold.

The process is similar to granite:

– Cleaning: Vacuuming, paint removal, using neutral chemicals, scrubbing, vacuuming water, and spot cleaning.

– Polishing: Let dry completely, apply polish, wait, buff with a machine using a white pad, and vacuum dust. Reputable industrial cleaning in Ha Noi units always pay close attention to these characteristics to protect expensive materials in villas or 5-star hotels.

4. Cleaning fabric upholstery and leather/faux leather sofas

Upholstered chairs in offices and hotels require periodic cleaning to remove dust and bacteria.

Fabric upholstery cleaning

– Vacuum the entire surface.

– Dilute and apply chemicals using a specialized upholstery cleaner; let soak for 1-2 minutes.

– Treat heavy stains.

– Use a soft brush to avoid fraying the fabric.

– Extraction using a high-power vacuum.

– Rinse with clean water and vacuum again.

– Repeat 2-3 times if necessary.

Note: Spray just enough liquid to avoid deep saturation, which causes mold or slow drying.

Leather – Faux leather sofas

– Vacuum.

– Wipe with a damp cloth and let dry.

– Test a diluted cleaning solution on a small area.

– Apply maintenance wax/conditioner.

– Wipe dry.

5. Intensive carpet cleaning

Office and hotel carpets easily trap dust and stains.

– Vacuuming.

– Apply chemicals using a scrubber.

– Treat localized stains.

– Scrub with a specialized brush.

– Vacuum extraction.

– Rinse with clean water and vacuum again.

– Repeat if needed. Similar to upholstery, use a moderate amount of liquid to prevent mold. Leading industrial cleaning in Ha Noi companies utilize integrated carpet extractors for high efficiency.

6. Cleaning glass, woodwork, and toilets

Glass cleaning

– Use a razor blade to remove hard debris.

– Apply cleaning chemicals.

– Use a squeegee to clear the liquid.

– Wipe dry and polish with newspaper or microfiber.

– This is essential for the exterior glass of high-rise buildings in industrial cleaning in Ha Noi services.

Woodwork

– Vacuuming.

– Remove paint if present.

– Damp wipe.

– Maintain with specialized wood chemicals.

Toilets

– Vacuuming.

– Scrape deposits from walls and floors.

– Use specialized chemicals for porcelain and stainless steel.

– Rinse with clean water. Toilet sanitation is a critical component of industrial cleaning in Ha Noi for schools and hospitals.

The material cleaning procedures outlined above are the foundation of quality service. Contact KlinClean—the expert in industrial cleaning in Ha Noi—for a free consultation and a suitable quote. A clean space brings comfort and professionalism to every activity!